Oil Additive

DESCRIPTIONColloidal solid lubricant suspension based on molybdenum sulfide (MoS2) in mineral oil. The product forms a high-load lubricating film on all rubbing and sliding surfaces. This in turn reduces friction, providing for smoother operation of assemblies and greater engine economy. Tested for turbochargers and catalytic converters. -

PROPERTIES

- Mixable with all commercially available motor oils
- Stable even under high thermal and dynamic permanent loads
- No deposits and absolutely compatible with all commonly used filter systems
- Reduces running-in and running wear
- Guarantees limp-home properties
- Reduces oil and fuel consumption

TECHNICAL DATA

AREAS OF
APPLICATION Added to the lubricating oils of engines, compressors, pumps and especially motor vehicle engines (gasoline and diesel). Mixable with all commercially available motor oils.

APPLICATION Add 5 % (50 ml per liter of oil) of Oil Additive to motor oil; in motorcycles with wet clutch, add 2 % (20 ml per liter of oil). Can be added to motor oil at any time. The
maximum dosage for motorcycles with a wet clutch is 2 %!

AVAILABLE
PACK SIZES Oil Additive

125 ml Part no. 1011
200 ml Part no. 1012
500 ml Part no. 1013
5 ltrs. Part no. 3710
205 ltrs.
Part no. 3749